If you use a power supply, make sure its voltage output is within the light bar’s specs. Testing the LED Light BarĬonnect your light bar directly to the vehicle battery or another DC voltage source as soon as you open the box. Wire ties help route wiring under the hood and inside the cab. Use marine grade or IP-rated connectors and you can forgo tape and caulking to seal splices. Vise-locks or C-clamps can hold the light bar in position when marking holes.įor light bar wiring, you need a pair of wire cutters, wire strippers and the correct crimpers for the connectors you choose. Dull drill bits of the wrong size will create frustration for yourself and possibly damage your vehicle. Only use drill bits that are the right size and are sharp. Tools and Materials You Needīesides a good set of screwdrivers, wrenches and pliers, you need a measuring tape and something to mark drill holes. Make sure everything you expected to be in the box is actually there. If you have researched various LED light bar reviews, you probably noticed that a few buyers received opened packaging with parts missing. For the largest light bars, you probably need a cover when not driving off-road. If not, do so now to avoid having to remove it or alter the mounting. Hopefully, you already checked local and state regulations regarding the use of auxiliary lights on your vehicle. Before You Get Startedīefore you jump into installing your new LED light bar, consider checking several things, before getting started: Is Your Light Legal? This article provides basic installation guidance to supplement the directions or schematics that came with your light bar. As long as you follow instructions and have basic tools, you can install your new LED light bar with little difficulty.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |